We Offer Free Shipping Worldwide.

Instruction/Showercaddy

Installation Instruction for Shower Caddy Series:
How to install with the adhesive hooks:
Step 1, Make sure the place you want to install it is at a 90˚right angle, wipe the surface and make sure there's no dust, water, and oil left on it. Step 2, Clamp one sticky hook on each side of the rack and place the rack at where you want to install it to measure the correct position. You can use a pencil to make a mark along the edge of the sticky hooks. Step 3, Take off the sticky hooks, peel off the back cover and stick them on the position marked on step 2. Press them and make sure there's no air inside the sticky patch. Step 4, Leave it for 24-48 hours, then hanging the shelf on the hooks.
How to install with the expansion screws: Step 1 : Put the shelf on where you need to install it on, mark the screw holes with pen. Step 2: Drill 6 mm holes with power drill on the position marked on the last step. Step 3: Insert the expansion tubes into the holes. Step 4: Put the shelf on, aim the expansion tubes with the screw holes, then tight the screws.



Should  you  have  any  questions,  please  contact  us  via  [email protected]